Violectric HPA V280, black

headphone amplifier with balanced headphone output


  • 1006280
  • 7426923823718
1,499.00EUR *

incl. VAT plus shipping costs

headphone amplifier with balanced headphone output more
  • symmetrische Eingänge über XLR, Neutrik, vergoldet
  • unsymmetrische Eingänge über Cinch, ALPS, vergoldet
  • unsymmetrische Ausgänge über Cinch, ALPS, vergoldet
  • optionaler digitaler Eingang
  • 2 Kopfhöreranschlüsse, Neutrik, versilbert
  • 1 Kopfhöreranschluss, Neutrik, 4-pol XLR, vergoldet
  • Diskret aufgebaute Endstufen mit 16 Transistoren pro Kanal
  • Hochwertige MKP Kondensatoren im Signalweg
  • High Quality OpAmps im Signalweg
  • ALPS RK27 High-Grade Lautstärkeregler
  • ALPS RK27 High Grade Balance Regler
  • verzögerte Zuschaltung der Kopfhöreranschlüsse per Relais
Violectric’s headphone amplifiers were developed with the target to enable ultimate transmission... more
Violectric’s headphone amplifiers were developed with the target to enable ultimate transmission quality for low- , medium- and high-impedance headphones. Because of their specific, variable, low-noise and low-distortion circuit design especially optimized for dynamic headphones, the HPA series fulfil even highest demands.
  • Low-noise because of low internal gain. Therefore the self-generated noise from the amplifier is not audible.
  • High output voltage through 60 Volt internal operating voltage. Therefore best suited for high impedance headphones. Over 90 % of all headphone amplifiers in the market offer not half that voltage!
  • High output power because of powerful amplifiers able to deliver much more current a headphone needs. Therefore best suited for low impedance headphones and even magnetostatic cans.
  • High damping factor through lowest output impedance. Therefore best suited for full control even over critical headphones with the guarantee to have flattest possible response.

Due to this consistent audiophile design, Violectric’s headphone amplifiers are multiple test devices. All case and back panel are made of aluminum and are Nextel coated. The 8 mm aluminum front panel is milled, sand blasted and black anodized or silver brushed. The labeling is laser engraved.

Like his „bigger brother“ HPA V281 the HPA V280 also uses our famous V200 amp technology to enable the typical uncolored but smooth sound signature. The inputs and outputs are situated on the rear panel, they are equipped with electronically balanced gold plated XLR connectors and unbalanced gold plated RCA connectors. Volume control is provided with a high-grade ALPS RK 27 pot with a large full metal rotary knob. The four built-in amplifiers provide balanced operation of headphones. Connection is made via 4-pin Neutrik XLR connectors. Two “standard” headphones may be connected via 1/4“ jacks on the front panel.

This amp may be equipped with one of six different digital inputs: Coaxial, Optical or USB with either 24/96 kHz or 24/192 kHz

input impedance: 10 kOhm
input sensitivity: +6 dBu
max. input level: +21 dBu
frequency range: 0 Hz - 60 kHz (-0,5 dB)
additional features: optinale digital Eingänge und Fernbedienung verfügbar
dimensions: 170 x 49 x 320 mm (BxHxT)
output impedance: 0,165 Ohm (unsym.)
signal-to-noise ratio (SNR): >129 dB (A-gew.)
THD: < -102 dB / < 0,0008 %
max. output level: 1800 mW (600 Ohm) | 5300 mW (100 Ohm) | 3100 mW (50 Ohm) | 2600 mW (32 Ohm) | 1500 mW (16 Ohm)
Crosstalk: -115 dB
Weight: 3,40 kg
  • 1x Violectric HPA V220
  • 1x Netzkabel
  • 1x Bedienungsanleitung
Similar products